Quick answer: After JHSC certification, you help your committee identify hazards, inspect the workplace, investigate serious incidents and make written recommendations to the employer. Under Ontario’s OHSA, the workplace must be inspected at least monthly, the committee must meet at least every three months, and the employer must respond to written recommendations within 21 days. Certified members also have a special power: in dangerous circumstances, they can help stop unsafe work.
You’ve finished Part 1 and Part 2 and you’re now a certified JHSC member. So what does the job actually involve day to day, month to month and year to year?
This guide breaks down JHSC member roles and responsibilities, including those of certified members, under Ontario’s Occupational Health and Safety Act (OHSA): what the committee does, how inspections and meetings work, how to write recommendations, and what powers certified members hold. If you’re still learning the basics, start with what JHSC certification is or our guide to JHSC requirements in Ontario.
Key takeaways
- Core job: identify hazards and recommend improvements to the employer.
- Monthly: workplace inspection by a designated worker member.
- Every 3 months (at least): committee meeting, with paid preparation time.
- Within 21 days: the employer must respond in writing to recommendations.
- As needed: investigate critical injuries and fatalities, and attend work refusal investigations.
- Certified members only: can help stop work in dangerous circumstances.
- Every 3 years: refresher training to stay certified.
What does a JHSC do?
Under section 9(18) of the OHSA, a joint health and safety committee has the power to:
- Identify hazards: situations, machinery, substances, processes, working conditions or procedures that may be a source of danger
- Make recommendations to the employer and workers to improve health and safety
- Recommend programs, measures and procedures to protect workers
- Obtain information from the employer about hazards, testing and health and safety experience
- Be consulted about, and have a worker member present at the start of, workplace health and safety testing
The committee is an advisory body. It doesn’t take over the employer’s legal responsibility for safety; it helps the employer find and fix problems.
JHSC member vs certified member: what’s the difference?
| All JHSC members | Certified members | |
|---|---|---|
| Identify hazards and make recommendations | Yes | Yes |
| Attend meetings (paid time, plus prep time) | Yes | Yes |
| Carry out workplace inspections (if designated) | Yes, worker members | Yes, often designated because of their training |
| Investigate critical injuries and fatalities (if designated) | Yes, worker members | Yes |
| Attend work refusal investigations (if designated) | Yes, worker members | Yes |
| Help stop work in dangerous circumstances | No | Yes |
| Refresher training every 3 years | No | Yes |
What do JHSC co-chairs do?
Every JHSC has two co-chairs: one chosen by the worker members and one by the management members. They typically:
- Set meeting agendas and chair meetings, often in rotation
- Make sure minutes are kept and shared
- Track recommendations and the employer’s responses
- Keep inspection schedules on track
If the committee can’t reach consensus on a recommendation after trying in good faith, either co-chair can send a written recommendation to the employer.
How do JHSC workplace inspections work?
Inspections are one of the most important JHSC duties. Under the OHSA:
- A worker member designated by the worker members inspects the workplace at least once a month.
- If inspecting the whole workplace every month isn’t practical, the committee sets a schedule that covers part of the workplace each month and the entire workplace at least once a year.
- The employer must give the inspecting member information and help, including someone to explain processes and equipment.
A typical inspection follows five steps:
- Plan: choose the area, review past reports and incidents, and prepare a checklist.
- Inspect: look at equipment, processes, housekeeping, PPE use and work practices, and talk to workers.
- Record: note each hazard, its location and how serious it is.
- Report: share findings with the committee and the employer.
- Follow up: track corrective actions until they’re closed.
Learn more about why workplace inspections matter.
How often does a JHSC meet?
A JHSC must meet at least once every three months, and the Minister can order additional meetings. Since a 2024 amendment, the OHSA no longer says meetings must be held at the workplace, so committees can also meet virtually. Many committees meet monthly, especially in higher-risk workplaces.
- Members are entitled to one hour, or longer if the committee decides, to prepare for each meeting.
- Time spent preparing for and attending meetings is paid work time.
- The committee must keep minutes and make them available to a Ministry inspector.
A typical agenda covers: review of the last minutes, inspection findings, incidents and near misses, open recommendations, new hazards or changes, and action items.
How do JHSC recommendations work?
Recommendations are how the committee turns findings into action:
- The committee agrees on a recommendation, or a co-chair writes one if there’s no consensus.
- It’s sent to the employer in writing.
- The employer must respond in writing within 21 days.
- If the employer agrees, the response includes a timetable for putting it in place. If not, it must give reasons.
Good recommendations are specific: what the hazard is, where it is, who is at risk, what control is recommended, and by when.
What are a JHSC member’s duties after an incident?
Critical injuries and fatalities
Worker members designate one or more members to investigate when a worker is killed or critically injured. The designated member may inspect the place where it happened and any related equipment, and reports findings to the Ministry and the committee.
Work refusals
When a worker refuses unsafe work, a worker member of the JHSC (preferably a certified member) is designated to be present during the investigation.
Near misses
The committee should also review near misses: events that could have caused injury but didn’t. They point to the same hazards as real incidents, without the harm. Learn how near-miss reporting prevents serious incidents.
What special powers do certified members have?
Certified members can act in dangerous circumstances, which the OHSA defines as situations where:
- The Act or regulations are being contravened, and
- The contravention poses a danger or hazard to a worker, and
- Any delay in controlling it may seriously endanger a worker.
In that situation, a certified member can ask a supervisor to investigate. If the danger isn’t fixed, two certified members, one worker and one management, can jointly direct the employer to stop the work. This is called a bilateral work stoppage. In some workplaces, a certified member may be allowed to stop work alone (a unilateral work stoppage), but only where the employer has adopted that procedure in writing, or the Ontario Labour Relations Board has declared it after an application by a certified member or an inspector.
These powers are serious, which is why certification training spends so much time on hazard assessment and the law.
JHSC duties calendar
| How often | Duty | Who |
|---|---|---|
| Monthly | Workplace inspection (whole workplace, or part of it on a yearly schedule) | Designated worker member |
| At least every 3 months | Committee meeting, with minutes | All members |
| Within 21 days of a recommendation | Employer’s written response | Employer |
| Yearly | Entire workplace inspected at least once | Committee |
| As needed | Critical injury and fatality investigations | Designated worker member |
| As needed | Work refusal investigations | Designated worker member |
| As needed | Work stoppage in dangerous circumstances | Certified members |
| Every 3 years | Refresher training | Certified members |
See the full JHSC Refresher training requirements.
What must employers provide to JHSC members?
To help the committee do its job, employers must:
- Pay members for meeting, preparation, inspection and investigation time
- Post the names and work locations of committee members in a conspicuous place at the workplace, or in a readily accessible electronic format
- Share information: hazard information, workplace testing results, inspector orders and reports, and reports of injuries and illnesses
- Respond to written recommendations within 21 days
- Pay for certification training for certified members
Frequently asked questions
What does a JHSC member do?
A JHSC member helps identify workplace hazards, takes part in inspections and meetings, and makes recommendations to the employer to improve health and safety.
What are the responsibilities of a certified JHSC member?
Certified members do everything other members do. They also have the power to help stop work in dangerous circumstances, are often designated for inspections and investigations, and must complete refresher training every 3 years.
How often must a JHSC inspect the workplace?
At least once a month. If that’s not practical, part of the workplace is inspected each month, and the whole workplace at least once a year.
How often does a JHSC have to meet?
At least once every three months. Many committees meet monthly.
How long does an employer have to respond to JHSC recommendations?
21 days. The written response must include a timetable if the employer agrees, or reasons if it doesn’t.
Are JHSC members paid for committee work?
Yes. Time spent on meetings, meeting preparation, inspections and investigations is paid work time.
Can a certified JHSC member stop work?
Yes, in dangerous circumstances. Usually two certified members, one worker and one management, must agree to direct a work stoppage.
Conclusion
JHSC certification is just the beginning. As a member, you’ll inspect the workplace, take part in regular meetings, help investigate serious incidents, and turn what you find into written recommendations the employer must answer within 21 days. As a certified member, you also hold the power to help stop work when a worker’s safety is in serious danger, and you keep that power by refreshing your training every 3 years.
Explore CPO-approved JHSC certification training to prepare your committee for these responsibilities.
Prepare your committee. Get JHSC certified with 4S Consulting’s CPO-approved Part 1, Part 2 and Refresher training, available online, virtually or on-site.
About the author
Sobi Ragunathan is Vice President of Operations, Strategy & Partnerships at 4S Consulting Services Inc. Sobi supports Ontario employers with workplace health and safety, COR®, ISO 45001, WSIB Health and Safety Excellence program implementation, and JHSC certification training.
This article provides general information about Ontario’s OHSA and is not legal advice.