JHSC Part 1 vs Part 2 Training: Key Differences and How They Fit Together

Table of Contents

Quick answer: JHSC Part 1 is general training on Ontario health and safety law, workplace roles and hazard basics, and it’s the same for everyone. JHSC Part 2 is workplace-specific training on at least six hazards relevant to your workplace. You take Part 1 first and Part 2 within 12 months, and you need both to become a certified JHSC member.

JHSC certification in Ontario comes in two parts, and people often ask how they differ, which comes first, and whether they really need both. The short answer: Part 1 teaches the rules and the method, and Part 2 applies that method to the hazards in your own workplace.

This guide compares JHSC Part 1 and Part 2 side by side, explains the order and timeline, and shows how Part 2 hazards are chosen.

Key takeaways

  • Part 1: general and the same for everyone. It covers OHS law, roles, JHSC duties and hazard basics.
  • Part 2: workplace-specific. It covers at least six hazards relevant to your workplace.
  • Order: Part 1 first, then Part 2 within 12 months.
  • Format: Part 1 can be taken by e-learning; Part 2 must be instructor-led.
  • Certification: you need both. Neither part certifies you on its own.

What is the difference between JHSC Part 1 and Part 2?

The main difference is focus. Part 1 is general and teaches how Ontario’s health and safety system works. Part 2 is specific and applies that knowledge to the hazards in your workplace.

JHSC Part 1 trainingJHSC Part 2 training
PurposeFoundation in OHS law, roles and the JHSCApplying hazard management to your own workplace
ContentSame for every workplace and sectorTailored to at least 6 hazards relevant to your workplace
Minimum length19.5 hours (3 days), or 13 hours by e-learning13 hours (2 days)
FormatsClassroom, live virtual, hybrid, blended or self-paced e-learningClassroom, live virtual or hybrid only (no e-learning)
EvaluationFinal evaluation, 75% pass markFinal evaluation with a case study: hazard tool, recommendation and action plan
WhenFirstWithin 12 months of completing Part 1
Certifies you?NoYes, once both parts are complete

What does JHSC Part 1 cover?

Part 1 gives every future certified member the same foundation:

  • How JHSC certification works
  • The roles of workplace parties and the Internal Responsibility System
  • Rights, duties and training requirements under the Occupational Health and Safety Act
  • How a JHSC operates, and the duties of members and certified members
  • Hazard categories, including occupational illness
  • Recognizing, assessing and controlling hazards, and evaluating controls
  • Workplace inspections and investigations of critical injuries, work refusals and dangerous circumstances

For module-by-module detail, read our complete guide to JHSC Part 1.

What does JHSC Part 2 cover?

Part 2 takes the hazard management method from Part 1 and applies it to real hazards in your workplace. You’ll:

  • Review key Part 1 concepts (recognize, assess, control, evaluate) and Ontario’s provincial hazard priorities
  • Study at least six workplace hazards in depth: how each causes injury or illness, which laws and standards apply, and how to control it
  • Practise with a Hazard Management Tool using workplace scenarios
  • Build an action plan for a hazard and draft recommendations to the employer

This practical focus is why Part 2 must be taught live by an instructor, in person, virtually or in a hybrid class.

Need Part 1 and Part 2? Bundle them and save up to $195.

CPO-approved JHSC certification from $570 with an extra $50 off at checkout.

How are JHSC Part 2 hazards selected?

Under Ontario’s program standard, the employer should do a workplace hazard assessment, in consultation with the JHSC, to choose the Part 2 training that best fits the workplace. The training must cover at least six hazards relevant to the member’s workplace.

Here’s a simple way to approach it:

  1. Review your hazard data: inspection reports, incident and injury records, near misses and your existing hazard assessments.
  2. Talk to your JHSC about which hazards concern workers most.
  3. List your highest-risk hazards, such as working at heights, machine guarding, lifting and ergonomics, chemicals, slips and falls, workplace violence or mental health.
  4. Choose a Part 2 course that covers at least six of them. Many providers offer sector-focused Part 2 courses, such as construction, healthcare or manufacturing, that already match common hazards.

What order do you take JHSC Part 1 and Part 2 in?

Part 1 always comes first. Here’s the full certification pathway:

StepWhenResult
1. Complete Part 1Any timeFoundation knowledge; final evaluation passed
2. Complete Part 2Within 12 months of Part 1You become a certified member
3. Complete Refresher trainingWithin 3 years of certificationCertification stays active
4. Refresher againEvery 3 years after thatCertification stays active

If more than 12 months pass between Part 1 and Part 2, you’ll need to retake Part 1. Many people take Part 2 within a few weeks of Part 1, while the material is fresh. To learn more about renewal, read how long JHSC certification lasts.

Can you take Part 1 and Part 2 with different providers?

Yes. Each part must be delivered by a CPO-approved provider, but they don’t have to be the same one. Using one provider for both does make scheduling and record-keeping easier, and it lowers the risk of missing the 12-month window.

Need Part 1 and Part 2? Bundle them and save up to $195.

CPO-approved JHSC certification from $570 with an extra $50 off at checkout.

How much do JHSC Part 1 and Part 2 cost?

Prices vary between providers. At 4S Consulting:

CoursePrice
Part 1, self-paced e-learning$275
Part 1, live virtual$395
Part 2, live virtual$345
E-Learning Bundle (Part 1 e-learning + Part 2 virtual)$570
Virtual Bundle (Part 1 + Part 2, both virtual)$690

A JHSC Part 1 and 2 bundle includes an extra $50 off and keeps both parts on one schedule.

JHSC Certification Bundles

Get Fully JHSC Certified for Less

Take your CPO-approved JHSC Part 1 and Part 2 training together and get an extra $50 off at checkout, on top of sale prices. One simple path to full certification, well within the 12-month window.

E-Learning Bundle

Part 1 self-paced e-learning + Part 2 live virtual

$570

$749

Virtual Bundle

Part 1 + Part 2 live, instructor-led virtual

$690

$885

Flexible virtual dates

Choose your virtual class date now. Need to change it later? Just contact our support team and we’ll help you move to another date.

Add Part 1 and Part 2 to your cart. The $50 bundle discount applies automatically.

Frequently asked questions

What is the difference between JHSC Part 1 and Part 2?

Part 1 is general training on OHS law, workplace roles and hazard basics, and it’s the same for everyone. Part 2 is workplace-specific training on at least six hazards relevant to your workplace.

Do I need both JHSC Part 1 and Part 2?

Yes. You only become a certified JHSC member after completing both parts.

How long after Part 1 do I have to take Part 2?

Within 12 months of completing Part 1. If you miss that window, you’ll need to retake Part 1.

Can JHSC Part 2 be taken online?

Yes, as live virtual training with an instructor. Self-paced e-learning isn’t permitted for Part 2.

How long is JHSC Part 2?

At least 13 hours, usually delivered over two days.

How are Part 2 hazards chosen?

The employer should do a workplace hazard assessment with the JHSC and choose Part 2 training that covers at least six hazards relevant to the workplace.

Can I take Part 1 and Part 2 with different providers?

Yes, as long as both providers are CPO-approved and you complete Part 2 within 12 months of Part 1.

Conclusion

JHSC Part 1 and Part 2 are two halves of one certification. Part 1 gives you the law, the roles and the hazard management method. Part 2 puts that method to work on at least six hazards in your own workplace. Take Part 1 first, complete Part 2 within 12 months, and you’re a certified member.

Explore all CPO-approved JHSC certification training options, or get started below.

Ready to get certified? Enrol in JHSC Part 1, then complete with JHSC Part 2, or save with a JHSC Part 1 and 2 bundle from 4S Consulting.

JHSC Certification Bundles

Get Fully JHSC Certified for Less

Take your CPO-approved JHSC Part 1 and Part 2 training together and get an extra $50 off at checkout, on top of sale prices. One simple path to full certification, well within the 12-month window.

E-Learning Bundle

Part 1 self-paced e-learning + Part 2 live virtual

$570

$749

Virtual Bundle

Part 1 + Part 2 live, instructor-led virtual

$690

$885

Flexible virtual dates

Choose your virtual class date now. Need to change it later? Just contact our support team and we’ll help you move to another date.

Add Part 1 and Part 2 to your cart. The $50 bundle discount applies automatically.

About the author

Sobi Ragunathan is Vice President of Operations, Strategy & Partnerships at 4S Consulting Services Inc. Sobi supports Ontario employers with workplace health and safety, COR®, ISO 45001, WSIB Health and Safety Excellence program implementation, and JHSC certification training.

JHSC E-Learning Bundle

Part 1 E-Learning + Part 2 Virtual

$570

$749

Flexible virtual dates

Choose your virtual class date now. Need to change it later? Just contact our support team and we’ll help you move to another date.

JHSC Virtual Bundle

Part 1 Virtual + Part 2 Virtual

$690

$885

Flexible virtual dates

Choose your virtual class date now. Need to change it later? Just contact our support team and we’ll help you move to another date.

Scroll to Top
0