Quick answer: Ontario Ministry of Labour inspectors can enter a workplace without notice, and proactive visits are usually unannounced. To be ready, keep proof of your certified JHSC members on hand, plus up-to-date meeting minutes, monthly inspection reports, written recommendations and the employer’s responses, required postings (including JHSC member names), and worker and supervisor awareness training records. Gaps in any of these can lead to orders.
When a Ministry inspector walks in, there’s no time to pull records together. The workplaces that handle inspections best are the ones that are always inspection-ready, and the JHSC is at the centre of that.
This guide explains how Ministry inspections work, what to expect in a Ministry of Labour JHSC inspection, and gives you a practical checklist to work through before an inspector arrives. For background, see our guide to JHSC certification requirements.
Key takeaways
- No notice: inspectors can enter without a warrant or notice.
- Certification proof: employers must keep proof of JHSC certification and show it to an inspector on request.
- Paper trail: minutes, inspection reports and recommendation responses show your JHSC is active.
- Postings: the OHSA, the awareness poster, policies and JHSC member names must be posted.
- Most common order: missing required postings, the top order in a Ministry inspection initiative of new small businesses.
- After the visit: post the inspector’s report and share it with your JHSC.
How do Ministry of Labour inspections work?
Ontario’s Ministry of Labour, Immigration, Training and Skills Development carries out two kinds of workplace visits:
| Type | Why it happens | Notice? |
|---|---|---|
| Proactive | Routine checks and targeted inspection initiatives (for example, sector or hazard blitzes) | Usually unannounced |
| Reactive | A critical injury, fatality, work refusal, complaint or occupational illness | Often immediate |
The Ministry announces the focus of its compliance campaigns in advance, but individual workplaces don’t get notice. Its current campaign on the internal responsibility system (IRS), running from April 1, 2026 to March 31, 2027, is a good reason to check your JHSC now.
During a visit, an inspector can:
- Question any person in the workplace
- Examine documents and records, and take copies
- Inspect, test or take samples of equipment, materials and substances
- Take photographs and measurements
- Ask to speak with a manager, a JHSC member or a health and safety representative
What do inspectors check on the JHSC?
When it comes to your committee, inspectors typically look for evidence that:
- A JHSC exists where one is required (generally 20 or more workers)
- At least one worker member and one management member are certified
- The committee meets at least every three months and keeps minutes
- The workplace is inspected monthly by a designated worker member
- Recommendations are made in writing and the employer responds within 21 days
- JHSC member names and work locations are posted
- The committee is part of a working Internal Responsibility System
JHSC inspection-readiness checklist
Work through this checklist now, and review it every quarter.
Download the JHSC inspection-readiness checklist (PDF)
Get a printable, two-page version of this checklist with tick boxes for all eight sections and space to record who reviewed it and when. Print it for your next JHSC meeting or keep it with your inspection records.
1. Certification records
- ☐ At least one certified worker member and one certified management member
- ☐ Proof of certification on file for each certified member, ready to show an inspector (the Chief Prevention Officer’s certification record, available through the Ministry’s online certification system)
- ☐ Each certified member’s certification date and next refresher deadline tracked (see refresher deadlines)
- ☐ Backup certified members for shifts and absences
2. Committee structure
- ☐ Correct number of members (at least 2 for 20 to 49 workers; at least 4 for 50 or more)
- ☐ At least half of members are workers, selected by workers or their union
- ☐ Two co-chairs, one from each side
- ☐ Terms of reference or committee procedures written down
3. Meetings and minutes
- ☐ Meetings held at least every three months
- ☐ Minutes for every meeting, signed or approved, and easy to find
- ☐ Action items tracked from meeting to meeting
4. Workplace inspections
- ☐ Monthly inspection reports by a designated worker member
- ☐ A schedule showing the entire workplace is covered at least once a year
- ☐ Hazards found are recorded, with corrective actions and completion dates
For more on inspection duties, see JHSC member roles and responsibilities.
5. Recommendations and responses
- ☐ Written JHSC recommendations on file
- ☐ The employer’s written response to each, within 21 days
- ☐ Timetables for agreed actions, and reasons for any declined
6. Investigations and incidents
- ☐ Records of critical injury and fatality investigations, with JHSC involvement
- ☐ Work refusal records showing a worker JHSC member was present
- ☐ Injury, illness and incident reports shared with the JHSC
7. Required postings
- ☐ A copy of the Occupational Health and Safety Act (in English and the workplace’s majority language)
- ☐ The “Health & Safety at Work: Prevention Starts Here” poster
- ☐ Your written health and safety policy
- ☐ Workplace violence and harassment policies
- ☐ Names and work locations of JHSC members (posted at the workplace or in a readily accessible electronic format)
- ☐ Copies of any recent inspector field visit reports and orders
8. Training records
- ☐ Worker health and safety awareness training for every worker
- ☐ Supervisor health and safety awareness training for every supervisor
- ☐ Other required training (such as WHMIS, and Working at Heights where it applies)
What are the most common orders?
In a Ministry inspection initiative that ran from April 1, 2018 to March 31, 2019, inspectors visited 3,942 new small businesses and issued 13,907 orders and requirements. The top ones were:
| Order | Number | Share |
|---|---|---|
| Required OHSA postings missing | 1,734 | 12.5% |
| Workers without basic awareness training | 1,225 | 8.8% |
| Supervisors without basic awareness training | 1,035 | 7.4% |
| No annual written health and safety policy or program | 713 | 5.1% |
| No worker health and safety representative where required | 577 | 4.1% |
| Workplace violence and harassment policies or programs missing | up to 367 each | 2.5–2.6% each |
The Ministry concluded that most orders reflected a “general lack of awareness and understanding” of employer responsibilities. In other words, they were preventable with good preparation.
What to do during an inspection
- Cooperate. Inspectors have the right to enter without notice. Welcome them and confirm who will accompany them.
- Involve the JHSC. Have a worker JHSC member and a management member available.
- Have records ready. Use your checklist binder or digital folder.
- Answer honestly. Don’t guess. If you don’t know, say you’ll find out.
- Take notes on what the inspector looks at and says.
- Don’t disturb an incident scene after a critical injury or fatality until the inspector allows it.
What happens after the inspection?
- The inspector gives the employer a written field visit report. Post it in the workplace and give a copy to the JHSC.
- If violations are found, the inspector may issue orders with compliance dates, or accept a compliance commitment for low-risk issues.
- Where there’s an immediate risk of injury, the inspector can issue a stop work order.
- After you comply, complete the Notice of Compliance. A JHSC member or health and safety representative indicates whether they agree compliance was achieved, and it’s returned to the inspector.
- Orders can be appealed to the Ontario Labour Relations Board within 30 days.
- Ignoring orders can lead to charges.
Common JHSC gaps to fix now
- Expired certifications: a certified member missed their refresher
- Only one certified member, or none on one side
- Missing months: gaps in inspection reports or minutes
- Unanswered recommendations: no written response within 21 days
- Outdated postings: old member names or missing policies
- Generic Part 2 training that doesn’t match your hazards (consider JHSC training for your industry)
Frequently asked questions
Can a Ministry of Labour inspector show up without notice?
Yes. Inspectors can enter any workplace without a warrant or notice, and proactive visits are usually unannounced.
What JHSC documents does an inspector want to see?
Typically: proof of certified members, meeting minutes, monthly workplace inspection reports, written recommendations and the employer’s responses, and posted JHSC member names.
Do employers have to keep proof of JHSC certification?
Yes. Employers must keep proof of their workers’ JHSC certification and make it available to a Ministry inspector on request.
What happens if my workplace doesn’t have certified JHSC members?
An inspector can issue an order to comply with a deadline. Ignoring orders can lead to charges and fines.
What is a Notice of Compliance?
A form the employer completes after fixing the issues in an order. A JHSC member or health and safety representative indicates whether they agree, and it’s returned to the inspector.
Does the JHSC take part in Ministry inspections?
Inspectors may ask to speak with a JHSC member, and the employer must share the inspector’s report with the JHSC.
Conclusion
A Ministry of Labour inspection doesn’t have to be stressful. If your JHSC has current certified members, regular meetings with minutes, monthly inspections, answered recommendations and the right postings, you’ll have the evidence ready whenever an inspector arrives. Work through the checklist above every quarter, and fix gaps before they become orders.
One of the most important gaps to close is certification itself. If you’re missing a certified worker or management member, or a refresher is overdue, start with CPO-approved JHSC training.
Don’t wait for the inspector. Get JHSC certified before your inspection with 4S Consulting’s CPO-approved Part 1, Part 2 and Refresher training, available online, virtually or on-site.
About the author
Sobi Ragunathan is Vice President of Operations, Strategy & Partnerships at 4S Consulting Services Inc. Sobi supports Ontario employers with workplace health and safety, COR®, ISO 45001, WSIB Health and Safety Excellence program implementation, and JHSC certification training.
This article provides general information about Ontario’s OHSA and is not legal advice.